Genuine Original Motorcycle and Vespa Mirrors by FAR Italy : Fitment questions : or text 3239205750

Ducati 959/1299 Panigale Matte Black LED mirrors 7593/94-Pair

Regular price $295.00

Ducati 959/1299 Panigale Matte Black LED mirrors 7593/94-Pair

Folding mirrors for the Ducati 959/1299 Panigale-Pair

Also fits the 2016 and later 1199 Panigale R

Fits all 2015-2018 models 959/1299

Note : 7/17/2018  :  2nd Production is delayed. 

Apologies ~6-8 weeks before we can ship out. 

If you order we will ship it out as soon as possible. Production ran out of the glass. 

Much better quality than the fixed stock all plastic non-folding 523S0521A, 523S0521B at $246.14 each

Drops in the stock fairing mounts, no mods to the bike. Includes Ducati connectors, no harness modifications.

Includes optional ballast resistors ( in case you are installing these mirrors with an already modified tail section)

These optional ballast resistors will sort that if needed.

Stock installation does not require these resistors.

Very Bright me on this.

Lifetime warranty through Moto-Science on LEDS.

Includes gaskets and connectors to fit either Ducati 959 or 1299.

Moto-science exclusive, Made in Italy.

Note: There is a mold release mark on the top edge of these shells on the entire production.

Ducati 959/1299 Mirror Installation instructions :

Dissemble the mounts, remove 11mm brass nut, spring, Black Alu cover.

Install beveled bases, high side of the base towards the back or rider,

one at a time.

Install black alloy base cover. Install the mirror and hand tension the 11mm nut hand tight. ( Do not use a ratchet, hand tight here )

Check for geometry. If the mirror is drooping, bases are reversed or backwards.

Thread wire through the hole in the arm pivot.

Wire up LEDS, check for operation. Install wire unions.

Test ride the bike, and torque mirror spring to your requirements ( folding or non-folding tension)

When you are satisfied with the details: Install Black Plastic Caps marked on inside SX for Left, DX for Right.

These caps can be removed after installation with a wedge-shaped chopstick working from the top to the side.

Do not use a metal screwdriver to remove the Black plastic cap as you will chip the powder coating.