Genuine KTM Ultimate Folding Mirror 225-325mm Adj. stem Univ/Yamaha/Ducati Perch Mount 6804U Each
Adjustable stem from 225mm-325mm. This mirror can be 225mm short or 325mm long horizontal reach.
If you can't see behind you with these mirrors, you're not even looking.
This model is recommended for ruff duty dirt bikes.
The 6804P version is the recommended version for street and highway usage.The mirror stem is adjustable and the stem slides up into the mirror head.
Maximum adjustment options and fits almost every motorcycle.
One mirror with 4 mounts. 8mm RHD, 8mm LHD, 10mm RHD,10mm LHD,
This kit will fit Yamaha and Ducati with the Left-hand thread perch mounts.
Nothing else needed. See Pictures.
This is the deluxe clamping nut style which will allow the mirror to twist in the event of a fall, saving a broken mirror.
Note: You have to not over tighten the clamping mount.
243mm is the stock SMC KTM 990 LC4 size
280mm is the stock KTM military size
Made in Italy. Convex mirror. Buy one or buy a pair.
Finest handlebar mirror design in the world... Ultimate Dirt and Street bike mirror.
Ratchet Folding feature can be locked down or left adjustable.
Folding Elbow adjusts from about 8.30am to 2.30pm on the clock.
Elbow joint can be adjusted on the fly up or down ( Y axis).
Additionally, the Mirrors can be slapped forward or back on the fly ( X-axis)
No comparison with bar end mirrors or short stock mirrors.
I use the same folding mirrors on my daily mule.
On slip joint models: grease the stud only
Tighten clamping nut only as much as needed to hold position.
You want the mirror to be able to spin/turn in the mount,
When this mirror is set up properly it can absorb a front-end impact.
Some riders with big windshields on R1200GS do this...
They slap these slip joint mirrors forward and backwards
to accommodate their large windshields when parking.
Moto-Science exclusive...... imported from Italy
Set up instructions : Screw in the Perch models “P” 5498P, 0097P, 5587P, 6804P, 5498Y, 0097Y, 5587Y, 6804Y,
Optional grease the elbows, ~blue loctite on the allen bolt....for long haul vibration.
Tension only as much as needed and fold on the fly all day...
Snug the 4mm elbow allen head only as tight as needed to stay wherever you put it.
The grease makes it much smoother.
For the clamping stud mount for “U” models: 5498U, 0097U, 5587U, 6804U
The above “P” instructions and these notes :
No need to over-tighten the stud clamping mount.
It only has to be tight enough to resist the wind. This is the clamping nut style which will allow the mirror to twist in the event of a fall or collision, saving a broken mirror.