Ducati 959/1299 Panigale Matte Black LED mirrors 7037/38 Pair
Folding mirrors for the Ducati 959/1299 Panigale
Also fits the 2016 and later 1199 Panigale R
Drops in the stock fairing mounts, no mods to the bike.
Super bright LEDS.
Lifetime warranty through Moto-Science on LEDS.
Bolts on fairing in 5 minutes, can be wired as running lights or turn signals
with our passive magic blinker modules: http://www.moto-science.com/product/magic-blinker-led-running-lights-module-pair
Includes gaskets and connectors which fit either Ducati 959 or 1299.
Moto-science exclusive, Made in Italy
Ducati 959/1299 Mirror Installation instructions:
Dissemble the mounts, remove 11mm brass nut, spring, Black Alu cover.
Install beveled bases, high side of the base towards the back or rider,
One mirror at a time.
Install black alloy base cover. Install the mirror, add some grease to the base of the mirror if you plan on folding the mirrors in a lot and hand tension the 11mm nut hand tight. ( Do not use a ratchet, hand tight here )
Check for geometry. If the mirror is drooping, bases are reversed or backwards.
Thread wire through the hole in the arm pivot.
Install blue resistor across the + and - wires of the mirror at the union of the white connectors is the best location to do this, tape it up. During prolonged turn signal operation the resistor will heat up, this is normal and harmless.
Wire up LEDS, check for operation. If you have polarity reversed, reverse the wiring and Pull the key out completely to reset the ECU. Once everything is working, finalize your wiring.
Test ride the bike, and torque mirror spring to your requirements ( folding or non-folding tension)
When you are satisfied with the details: Install Black Plastic Caps marked on the inside, SX for Left, DX for Right.
These caps can be removed after installation with a wedge-shaped chopstick working from the top to the side.
Do not use a metal screwdriver to remove the Black plastic cap as you will chip the powder coating.