Genuine Original Quality Motorcycle Mirrors by FAR Italy

KTM Folding Mirror 225mm Bar Mount 5498B Each

Regular price $36.95

KTM Folding Mirror 225mm  5498BB, each.

KTM Folding Mirror 225mm length

KTM OEM Folding mirror 225mm horizontal reach.

KTM Bar mount each and KTM Bar mount pair

225mm is used on the KTM 200-250-350-450 cc bikes

Made in Italy. Convex mirror. Buy one or buy a pair.

Handlebar mount :

Save your master cylinder perch from breaking....on KTM Motorcycles when you crash hard.

If you have any questions, use a ruler to do a mock-up on your bike.

This mirror is 225mm or ~9 inches horizontal from the pivot to the outside edge of the mirror.

Price compare here ~$47.49 each:

Finest handlebar mirror design in the world... Ultimate Dirt and Street bike Enduro mirror.

The Emgo folding mirror, Acerbis etc. may be cheaper, but too short to work very well.

Bar end mirrors are another hard to see out of solution and don't work very well.

Ratchet Folding feature can be locked down or left adjustable.

Can be folded out of the way for off-road.

The angle of adjustment on the folding elbow

is from 8.30AM to about 3 PM on the clock

which offers every conceivable position you could want.

No comparison with bar end mirrors or stock mirrors.

Suzuki SV650, V-Strom, Ninja 650R Versys, Honda Transalp, KTM, Moto Guzzi,

Husqevarna, Triumph, KLR650 and much more with 10mm x 1.25mm mounts.

Reverse mounts for left side on Ducati Monster and Yamaha.

Bar Mounts can be fitted to any motorcycle with the 7/8 inch handlebars

Save your master cylinder or clutch perch from breaking....on Motorcycles.

Set up instructions : Screw in the Perch models P”  5498P, 0097P, 5587P, 6804P, 5498Y, 0097Y, 5587Y, 6804Y, 

Optional grease the elbows, ~blue loctite on the allen bolt....for long haul vibration.

Tension only as much as needed and fold on the fly all day...

Snug the 4mm elbow allen head only as tight as needed to stay wherever you put it.

The grease makes it much smoother.

For the clamping stud mount for “U” models: 5498U, 0097U, 5587U, 6804U

The above “P”  instructions and these notes :

No need to over-tighten the stud clamping mount.

It only has to be tight enough to resist the wind. This is the clamping nut style which will allow the mirror to twist in the event of a fall or collision, saving a broken mirror.