KTM Folding Mirror 225mm, 5498P Each
KTM OEM Folding mirror 225mm horizontal reach
10mm x1.25mm RHD pair,
225mm is used on the KTM 200-250-350-450 cc bikes
Made in Italy. Convex mirror.
This model is recommended for highway and light-duty dirt bikes.
For heavy duty dirt bikes, we recommend our more rugged 5498U model.
If you have any questions, use a ruler to do a mock-up on your bike.
This mirror is 225mm or ~9 inches horizontal from the pivot to the outside edge of the mirror.
Finest handlebar mirror design in the world... Ultimate Dirt and Street bike Enduro mirror.
The Emgo folding mirror, Acerbis etc. may be cheaper, but too short to work very well.
Bar end mirrors are another hard to see out of solution and don't work very well.
Ratchet Folding feature can be locked down or left adjustable.
Can be folded out of the way for offroad.
The angle of adjustment on the folding elbow
is from 8:30 AM to about 3 PM on the clock
which offers every conceivable position you could want.
No comparison with bar end mirrors or stock mirrors.
Suzuki SV650, V-Strom, Ninja 650R Versys, Honda Transalp, KTM, Moto Guzzi,
Husqevarna, Triumph, KLR650 and much more with 10mm x 1.25mm mounts.
Reverse mounts for left side on Ducati Monster and Yamaha.
Bar Mounts can be fitted to any motorcycle with the 7/8 inch handlebars
Save your master cylinder or clutch perch from breaking....on Motorcycles.
Exclusive to Moto-science......Imported from Italy.
Set up instructions : Screw in the Perch models “P” 5498P, 0097P, 5587P, 6804P, 5498Y, 0097Y, 5587Y, 6804Y,
Optional grease the elbows, ~blue loctite on the allen bolt....for long haul vibration.
Tension only as much as needed and fold on the fly all day...
Snug the 4mm elbow allen head only as tight as needed to stay wherever you put it.
The grease makes it much smoother.
For the clamping stud mount for “U” models: 5498U, 0097U, 5587U, 6804U
The above “P” instructions and these notes :
No need to over-tighten the stud clamping mount.
It only has to be tight enough to resist the wind. This is the clamping nut style which will allow the mirror to twist in the event of a fall or collision, saving a broken mirror.